Four Door Wafer Desiccator Cabinet Static Dissipative PVC 26.5x25x48

$4,050.00

    • 81 $
    • 115 $
    • 75 $
    • 1380 $

    one set of chrome plated wire rack per chamber is required if any shelving is needed. ($27 per chamber)

    • 50 $
    • 55 $
    • 55 $
    • 385 $

Description

 Wafer Desiccator Cabinet Overall Dimensions 26.5’’x25’’x48’’
Material ¼’’ Thickness Static dissipative PVC, ESD safe (Interior and exterior walls are static dissipative except back plenum removable panel which is non-dissipative PVC. )
 Grounding system for electrostatic discharge
 Stainless steel door frame and stainless steel hinge
 Chrome plated Lift-and-turn Latch.
 Santoprene one-piece sealing.
 Designed specifically for standard lot boxes, carries used for 200mm wafer.
 Capacity of 16 containers, based on Wafer Containers 12’’W x 11’’D x 10 ¼’’ H or smaller
 Opening of the door measures 25’’ x10 13/16’’ H
 Internal usable space 23’’ D x 12’’ H

Additional information

Weight130 lbs
Dimensions32 x 32 x 54 in
Application

Wafer Storage

No. Of Chambers

Shelf Space (Usable Area) W"xD"

25×23

Overall Dimension W" x D" x H"

26.5x25x48

Material

Static-Dissipative PVC

Chamber Size

26.5x25x12

Access Door

One Side

  • Gas-in Port & Pressure Relief Valve (1/4’’ OD tubing fitting)
  • One- Channel Automatic Purge Control Unit (PCU) with one humidity sensor which is installed in the lower chamber of multi-chamber desiccator. (There are some perforated holes between chambers which connect the chambers together)
  • For more critical requirements, select the Multi-Channel nitrogen purge control unit. For each chamber there is separated sensor and controller.
  • Flowmeter, range 2-20 SCFH air. With Valve-External Mount ( Not required if order PCU )
  • Big Digit Hygrometer ( Temp. range: 140° F , humidity range: 10% to 99 % RG )
  • Stand with Caster or leveling mount Epoxy Power Coated Steel
  • Perforated Stainless Steel Shelf, Perforated Acrylic Shelf and (Required wire racks for shelf placement)